Our classes will be going live 31st March 2020, in the meantime you can sign up with the coupon below to receive 20% discount in our pre-launch sale.  Please remember to use the coupon code, unfortunately refunds cannot be given if you forget to enter the code.

Get 20% off at checkout with coupon code: 20OFF

Sweat Soldered Bangle

Intermediate

Conquer your soldering fears as we take you step by step through making this stunning saw pierced and sweat soldered bangle. We have included a total of 5 designs in the course resources section, which you can use as you wish - just in case you want a little more practice! This project will require confidence in soldering and piercing. This course will go live 31st March 2020.
Sign Up Here

Class Format

Our classes will be in an on-demand video format so you can watch them whenever it suits you - no need to worry about fitting your schedule around us.  You'll also be able to download and print all our handouts for reference right at your workbench.

Each class will come with downloadable detailed lists of tool and material requirements and we'll even include our favourite suppliers in there too!  Including for all those luscious gemstones.

Whilst we aim to keep our classes waffle-free and as to the point as possible, we can't promise not to go off on tangents exploring techniques and ideas, but hopefully as an artist you'll understand that.

We hope you're going to love our classes as much as we enjoy making them. But more than that, we hope to see you kick some serious ass as you work through the projects here.  Don't forget to share your successes and even your failures on our students-only Facebook page. We want to be with you in the good times and the bad.

Welcome aboard guys - Let's do this!!!


What you'll need

Essential tool requirements:

  • A big torch such as a Smith Silversmith, a Sievert or a Smith Little Torch with a rosebud head – there is no chance of doing this with a small butane torch
  • Soldering surface (we use hard charcoal or a solderlite pad from Rio Grande), tweezers or solder pick, flux and pickle
  • Jewellers saw and good quality blades (we are using 2/0 blades)
  • Chasing hammer
  • Steel block
  • We use Durston’s Bangle Forming Die Set to form the bangles, but this is not absolutely necessary.  We will go into other options in the course.
  • Sandpaper in various grits – we use 240, 600, 800 and 1200
  • Half round needle file – #2 cut is ideal
  • Flat hand file – #0 or #2 cut
  • Rawhide mallet or dead blow mallet
  • Flex shaft 
  • 1mm drill bit
  • Fine brass brush
  • Double sided tape or rubber cement (basically kiddie glue – not a glue stick)
  • 20 or 22-gauge sheet in sterling silver, copper, bronze or brass
  • Hard silver solder
  • 22-gauge titanium sheet


The list can go on and on for tool requirements depending on your budget, and we will include a variety of possibilities in our downloadable handouts and during the tutorials. However, we want to make our projects available to everyone irrespective of budget so for the most part we will try not to get too flashy with the essential tools.

We try to be as helpful as possible and we hope that this list will be useful in getting you started. But please be aware that in order to keep class costs low, and because of the potential volume of such queries, we cannot respond to any emails asking about required materials, tools or how to go about using such tools.  The details will be covered extensively in our classes, and we recommend that you don't purchase tools and materials before we have the chance to show you all the incredible possibilities.

Lets do this!

You'll be amazed at just how much you're capable of

What's Included in the Course

We've included tonnes of extras to ensure you can complete this project confidently and fabulously!

  • Full video instructions on how to make a sweat soldered cuff bracelet

  • Full downloadable handouts explaining step by step the project, including a problem-solving section

  • Downloadable tools and materials list

  • Downloadable suppliers list

  • Tool making videos

  • 5 royalty-free designs for you to use and sell!

  • Access to students-only Facebook group

Techniques Covered:

  • Saw piercing – you’ll need basic piercing skills already. If you need to brush up on these, check out our Saw Pierced Pendant class

  • Adding textures and using roller plates with a rolling mill

  • Sweat soldering – Ideally you’ll already have basic soldering skills. If you don’t, take a look at our Chunky Chain class

  • Using a solder pick

  • Making titanium solder clips

  • Forming bangles using different tools

  • Adding form to metal with files and burs

We're here to support you


We want every single student who signs up to not only complete the project, but do it with confidence! We appreciate that everyone learns differently so not only are our lessons delivered through high quality video tutorials, they're also supported by full written handouts including detailed instructions, extensive infographics and high quality close up photographs.

And if that isn't enough, we've got your back with a students-only Facebook page where you can enjoy the community that comes with taking a class - and  where we'll be checking in daily. If you find yourself in a pickle, help is just a click away!  It's also a great way to show off some of your own designs too - go ahead and brag away, we just love to see how you're doing!



We know that it's difficult to get started on the road to creating a jewellery collection. Time, money and confidence play a huge part in addition to learning the skills required. That's why we designed this course to not only be easy to follow with lessons in video and written form, but we provide a full support system through our students-only Facebook page where you'll receive feedback and answers to any problems you're facing as well as positive critiques on finished projects.

  • Confidence building, easy to follow, step by step lessons. If you fail that's because we failed you

  • Short and direct to the point lessons, we know you're tight on time, we won't waste it with waffle!

  • Support and feedback through our students-only Facebook group. We won't let you struggle alone

Frequently asked questions

  • How often can I watch the videos?

    If you purchase the course, you can watch the videos as many times as you like for a 1-year period.

  • Do I need specialist tools and equipment for this class?

    Yes you will need specific tools for this class, we have included a tool list for you to view at the beginning of the course.

  • Can I download the videos?

    The videos are only playable through the website and so are not downloadable.

  • Can I download the handouts?

    Absolutely you can! It would be pretty tough to work with your laptop on your workbench.

  • I haven't done any metalwork before, is this a good place to start?

    This class is better suited to those who already have a good foundation in soldering and piercing work.

  • Will I get a certificate

    Upon submission of final assignment you will receive a certificate.

  • Do the videos have subtitles?

    Unfortunately not, however our handouts that accompany the videos have extensive, easy to follow instructions.

  • Can I just purchase the handouts?

    We only offer the courses as a package.

Instructor

Lucy Walker - Founder and Creative Director


Gemologist, artisan, entrepreneur and educator, Lucy Walker has studied, worked and travelled all over the world, pursuing her dreams in jewellery design.   

Born in Sheffield, England, she moved to Manila at the age of 21 to study at the Gemology Institute of America.  By 23, she was studying metal-smithing and working in fine-jewellery in New York City.   At 28, she returned to her home in England to secure a degree in jewellery design from the prestigious Birmingham City University School of Jewellery before accepting a job with Australia's largest and oldest pearling company, Paspaley, and relocating to Darwin.

Then, in 2015, her globetrotting came to an end, when she moved to Kuala Lumpur, the city she now calls home, to take up a jewellery design teaching position at Raffles College.  Two years later, driven by a desire to establish a modern, relevant curriculum for jewellery design and a creative community in which makers and designers of all levels can feel at home, she established The Academy at Lucy Waker Jewellery Design.

The Academy is unique in that is specializes in short, modular courses to help artisans build a bespoke set of skills to further their own individual passion for making jewellery, with a focus on talent sharing and growing together.  In 2019, The Academy launched an online learning portal to allow more students to join the community.  

In her free time, Lucy continues to travel, observing and learning from goldsmiths, gemologists and metal-smiths around the world and picking up beautiful gems along the way for her private clients.  Lucy is married to her business partner Shaun Terence Teo and under her workbench you'll usually find her CrossFit gear, her running shoes and her other partners in crime, her dogs, Leonard, Lola and Howie.

Give me more classes......

  • $150.00

    $150.00Metalsmithing Bundle

    Purchase this class as part of our 5-class metalsmithing bundle
    Buy Now
  • $300.00

    $300.00All Classes Bundle

    Purchase this class as part of our 10-class stone setting and metalsmithing bundle
    Buy Now